As stated by various seasoned interior designers, the ideal and recommended way of improving your bathroom’s water pressure is by installing a perfect showerhead. Presently, there are different kinds of showerheads with modern qualities that help to save water, and also provides an excellent bathing experience.
Although, there are individuals who do not want to squander money on the renovation of their bathrooms, and perhaps, they just relocate to a new home. If you fall into either category or you just don’t have enough cash to change your present massage showerhead, there are other ways you can boost the pressure of water in your shower.
When the cost of replacing a showerhead is considered, it’s not as expensive as changing the complete water piping system of a home.
In this article, you’ll discover some of the DIY ways of increasing water pressure in showerheads. These methods will ultimately save you the assistance of a professional plumber.
Remove Showerhead’s Aerator
Table of Contents
Showerhead aerator is usually a small component that is installed solely to control the shower flow through the addition of air to the water. Even though different models of showerheads work in diverse ways, it is normal that aerators can cause water pressure problems.
That’s why many homeowners will prefer to remove the aerators when there’s a reduction in the water pressure. To replace an aerator with another, this depends on the type of your showerhead. Consider checking the manufacturer’s manual to locate the position of the aerator.
Clean The Shower Head
There can be a clog of debris in the components of a showerhead, which can lower water pressure. Over time, some sediments like grime or hard water salts can gather in the holes of the showerhead. Cleaning them is very simple once you have the appropriate tools in your hands.
Nevertheless, avoid using harsh substances that can damage your showerhead. To have useful cleaning experience, consider soaking the showerhead in a few vinegar solutions for about 2 – 3 hours or use a safety pin to de-clog the holes. Regular inspection of the showerhead is advised to prevent future buildups of sediments.
Removal Of Flow Regulator
Basically, most of the modern showerheads have a water flow regulator fitted in them for water and energy conservation. In some states, the federal regulations require that showerheads must have flow regulators.
Although most of the modern showerheads will give you a comfortable shower experience, some flow regulators don’t provide the perfect pressure you want.
In this case, remove the flow regulator to boost the shower pressure immediately. All you need is locating the regulator and use suitable pliers and wrenches to remove it.
Repair Water Leakages
Sometimes, a low-pressure shower may be caused by water leakages. Basically, if they occur on the water supply pipe of the main bathroom. To get the pipe repaired, you need to call on a professional plumber, except you have the skills and right tools to fix the damage.
The regular water leakages that may affect the shower pressure take place at the back of a shower wall. You can easily examine and fix this problem on your own. Additionally, look around to see if there are damaged or inappropriately wrapped Teflon tapes.
Replace Showerheads
As earlier mentioned, replacing a showerhead is less expensive compared to refurbishing a general plumbing system. For some homeowners, the easiest and quickest way of increasing shower pressure is to replace the showerhead.
There are different designs of showerheads in the market today, pick an ideal model with excellent features for your great bathroom.
If you want a showerhead that can be screwed back into place in minutes, simply get a high-pressure showerhead. According to the advice of professional interior designers, choosing a showerhead style that compliments your bathroom environment is a wise decision.
Adjust The Central Shutoff Valve
Checking the shutoff valve worth consideration when there is low water pressure. If the shutoff is open half-way, it might probably be the reason behind the low water pressure. Turn it to open completely; it might save you some bucks that you could have used to pay an expert.
Some homeowners forget to check the shutoff valves when there’s low water pressure. Hence, endeavor to check the shutoff valve before calling a plumber or consider replacing the showerheads.
How To Increase Your Shower Water Pressure
Conclusion
Now that you have a few great tips as listed above, you can move on to do whatever it takes to increase the water pressure of your showerhead.
One of the tips mentioned above may be all you need for the result. If one of the methods fail to work, try another until you arrive at a better or desired water pressure.
In general, the above-listed tips will give you the desired result on how to increase the water pressure of a showerhead.
Peradventure you do not get any success with these methods, consider hiring a skilled plumber to detect and fix the issue.
You May Also Like To Read:
Best Shower Base
Best Shower Drain
Best Shower Panel